electric zone valve motor, zone valve synchron motor actuator DC5V, 2NM
The motorized valves actuator are used to control the on/off of fan coil in air-conditioning system, central heating and flux in water system. The valves are divided into two parts, actuator and valve body. The ball valve actuators are widely used the zone control valves in heat meter, floor heating system, hot water control, air conditioning, HVAC, cold water meter, etc.
It is with reversible synchronous geared motor, DC2.5-5V mini motorized valve actuator uses electricity to direct the water in central heating systems from the boiler to where it needs to be - either to the cylinder coil to heat the hot water, or to your heating circuit to heat (typically) your radiators.
Technical data-Model K01
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at idle: <25 mA @ 3.6V, 23ºC
3. Current with max loading: <550 mA (motor #320)
4. Torque: >1.8 NM
5. Open/close time: <10S
6. Velocity reduction ratio: 2000:1 (for DN15 / DN20 ball valve)
7. Protection: IP67