Green Building, Low Carbon Emission
| Place of Origin: | China |
|---|---|
| Brand Name: | Runpaq |
| Certification: | CE |
| Model Number: | 50K1-T2-15 |
| Minimum Order Quantity: | 50 pieces |
| Price: | USD25/piece (>1000pcs) / USD26.5 (50-1000 pcs) |
| Packaging Details: | box + maste carton + pallet |
| Delivery Time: | 15-21 days |
| Payment Terms: | L/C, T/T, D/A, D/P, Western Union |
| Supply Ability: | 200000 sets/month |
| Diameter: | Full Diameter Or Reduce Port: DN8-32 | Work Pressure: | 10bar / PN10 / 1.0 Mpa / 150 Psi |
|---|---|---|---|
| Work Current: | <80 MA | Voltage: | DC5V / DC12-24V / AC85-230V / AC220V |
| Torque: | 3.5 NM | Open/close Time: | < 5 Seconds |
| Product Name: | Underfloor Heating Motorized Valve;underfloor Heating Zone Valve | Application: | HVAC, Hydronic Heating And Cooling, Boiler, Geotheramal Systems With Water Source Heat Pumps |
| High Light: | 3.5 NM Central Heating Motorised Valve,3.5 NM Electric Zone Valves,Central Heating Motorised Valve |
||
boiler zone valve/ Zone heating valves for heating and cooling unit, with thermostat
Product Description
The electric zone valves on central heating and cooling systems, heating boilers, it controls hot water heat or cold water. In all cases, when the zone control valve is fully open, an "end switch" inside the valve tells the heating system's circulator to begin operating, causing hot water to flow through the zone.
Our zone control valve is a range of 2-way motorized zone valve, which is with motor actuator for use in heating and cooling system. The brass or stainless ball valve is available in DN15-32, PN10 with thread connection. The actuator is controlled by 2-point signal and is recommended for on/off function, available for 230V AC, 50/60Hz or DC power supply.
Features
Application
Advantages
| No. | Ours | Normal products |
| Valve shaft seal | Quadruple seals | Dual seals |
| Nut seal | Auto super anaerobic glue coating, Consistent torque tightening | Manual anaerobic glue, unevenly, non consistent torque tightening |
| Seal between valve body and housing | Seal groove | none |
| Torque | Smoothly and light | Heavy, non consistently |
| Drainage | Yes | none |
Technical data
| Model | 50k |
| Work Amp (mA) | Max80mA |
| Protection | IP65 |
| Power (W) | <5 |
| Operate Pressure (Mpa) | PN10 |
| Torque (NM) | 3.5 |
| Dia range | DN8-32 |
| Open/close (S) | < 8s |
| Work volt. (V) | DC3-6V, DC12V, AC/DC9-24V, AC220V, AC85-265V |
| Media temp (℃) | 0-90 |
| Control | CR02 |
| Valve body material | Connection port | Diameter | D | L | H | W |
| (mm) | (Kg) | |||||
| Brass | Both female thread full diameter | DN8 | 8 | 46 | 31 | 0.402 |
| DN15 | 15 | 57 | 38 | 0.478 | ||
| DN20 | 20 | 71 | 45 | 0.559 | ||
| DN25 | 23.5 | 72 | 49 | 0.648 | ||
| Both female reduced diameter | DN10 | 8 | 46 | 31 | 0.401 | |
| DN20 | 15 | 66 | 38 | 0.493 | ||
| DN25 | 20 | 72 | 47 | 0.653 | ||
| DN32 | 25 | 86 | 60 | 0.865 | ||
| 3 way vertical | DN15 | 12 | 63 | 49 | 0.48 | |
| DN20 | 15 | 66 | 53 | 0.537 | ||
| CPVC | Both male thread | DN15 | 15 | 60 | 47 | 0.357 |
| DN20 | 20 | 72 | 51 | 0.385 | ||
| Brass | 3-way horizontal | DN8 | 6 | 52.6 | 39 | 24.5 |
| DN15 | 12 | 72 | 55 | 39 | ||
| DN20 | 15 | 86 | 63.5 | 44 | ||
| DN25 | 15 | 97 | 68.5 | 43.5 | ||
1. Connecting SW to OPEN, the valve opens , getting the position ,automatically power off, the valve remain fully open position
2. Connection SW to CLOSED, the valve close , getting the position ,automatically power off, the valve remains side passes position (fully closed)
Note: AC24V/AC220V can only be used for 50K series electric valves
Factory show
