Geared Synchoronous Motor Actuator, Mini Motorised Valve Actuator
DN15 DC Motorized Valve Actuator
1.8NM Torque Motorized Valve Actuator
Geared Synchronous Motorized Valve Actuator
Water Meters 1.8NM torque DN15 DC motorized valve actuator for ball valve
The reversible synchronous geared motor is used in a ball valve which are driven by electricity to direct the water in central heating systems from the boiler to where it needs to be - either to the cylinder coil to heat the hot water, or to your heating circuit to heat (typically) your radiators.
Our step geared motor actuator can be attached to IC card prepay water meter, heat meter, motorized ball valve to control the electric ball valve open or close. The synchronous geared motor is an electric motor actuator in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of electric cyles.
Technical data-Model K16
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at idle: <25 mA @ 3.6V, 23ºC
3. Current with max loading: <550 mA (motor #320)
4. Torque: >1.8 NM
5. Open/close time: <8S
6. Velocity reduction ratio: 1500:1 (for DN15 / DN20 ball valve)
7. Protection: IP67