Green Building, Low Carbon Emission
| Place of Origin: | China |
|---|---|
| Brand Name: | Runpaq |
| Certification: | CE |
| Model Number: | S8100-DN15 |
| Minimum Order Quantity: | 50 pieces |
| Price: | USD25/piece (>1000pcs) / USD26.5 (50-1000 pcs) |
| Packaging Details: | box + maste carton + pallet |
| Delivery Time: | 15-21 days |
| Payment Terms: | L/C, T/T, D/A, D/P, Western Union |
| Supply Ability: | 200000 sets/month |
| Diameter: | DN15-20 (3 Way) , DN8-DN32 (2 Way) | Pressure: | PN16 / 1.6 Mpa / 232 Psi / 16 Bar |
|---|---|---|---|
| Max Current At Idle: | < 25 MA | Max Current At Full Load: | About 550 MA |
| Torque At 3.6V: | > 1.8NM | Open Close Time: | < 8 Seconds |
| Valve Body Material: | Brass, Stainless Steel SS304, 316 | Product Name: | Flow Control Ball Valve With Temperature Sensor |
| High Light: | motorized Heating Ball Valve,DN20 Heating Ball Valve,3 way motorized ball valve |
||
intelligent heating ball valves manufacturer, central heating zone valve control
Product Description
A diverter valve, is one type of heating ball valve, can be located after the hot side circulator and boiler, or at the end of cold side zone circuit. Our mini motorized ball valve are precisely milled, life cycle more than 100,000 cycles. It's your best choice to use our motorised valve body on your zone control valve.
Application
Advantages
| No | Name | Material | Advantage |
| 1. | O-ring |
Import fluoro rubber (green) |
Resistance to high temperature, oil, corrosion, chemicals, Work temp.: —30℃+280℃.Quadruple seals, minimize the risk of leakage. |
| 2. | Drainage | Drain just in case leakage happens | |
| 4 | 0-ring | EPDM (red) | Between nut and valve body, extra external leak proof, reduce the possibility of internal leak |
| 8. | Ball | Brass or SS304 | Finely polished, rack nickel plating (not barrel plating), smooth surface, improved torque performance |
| 9. | Water proof G | Avoid water into housing, seal between valve body and valve housing |
| No | Name | Material | Advantages |
| 5. | Wall thickness | 2.0mm, PN20 | |
| 6. | Teflon washer | Import teflon |
1. Import teflon tube, numerical processing to perfectly match with ball surface 2. Minimal deformation, polish surface, wearable |
| 7 | 0-ring | EPDM |
1. Good elasticity, as buffer after Teflon washer to improve seal effect 2. Reasonable structure design, ensures perfect holding margin |
