Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
Place of Origin: | China |
---|---|
Brand Name: | Runpaq |
Certification: | CE |
Model Number: | 1703-DN15 |
Minimum Order Quantity: | 50 pieces |
Price: | USD25/piece (>1000pcs) / USD26.5 (50-1000 pcs) |
Packaging Details: | box + maste carton + pallet |
Delivery Time: | 15-21 days |
Payment Terms: | L/C, T/T, D/A, D/P, Western Union |
Supply Ability: | 200000 sets/month |
Diameter: | DN15-20 (3 Way) , DN8-DN32 (2 Way) | Pressure: | PN16 / 1.6 Mpa / 232 Psi / 16 Bar |
---|---|---|---|
Max Current At Idle: | < 25 MA | Max Current At Full Load: | About 550 MA |
Torque At 3.6V: | > 1.8NM | Open Close Time: | < 8 Seconds |
Valve Body Material: | Brass, Stainless Steel SS304, 316 | Product Name: | Flow Control Ball Valve With Temperature Sensor |
High Light: | PN16 central heating 3 way valve,DN15 central heating 3 way valve,3 way thermostatic mixing valve |
automag zone valve, heating ball valve for 3 way zone valve control heating system
Product Description
Our motorized valve body is finely made of brass or stainless steel, its pressure rating is PN16, and life time is more than 100,000 cycles. A diverter valve, is one type of heating ball valve, can be located after the hot side circulator and boiler, or at the end of cold side zone circuit. In case of faulty, you can check whether the valve body is in good status, or stuck. Supposing it's good, you can change the motor head only.
Application
Advantages
No | Name | Material | Advantage |
1. | O-ring |
Import fluoro rubber (green) |
Resistance to high temperature, oil, corrosion, chemicals, Work temp.: —30℃+280℃.Quadruple seals, minimize the risk of leakage. |
2. | Drainage | Drain just in case leakage happens | |
4 | 0-ring | EPDM (red) | Between nut and valve body, extra external leak proof, reduce the possibility of internal leak |
8. | Ball | Brass or SS304 | Finely polished, rack nickel plating (not barrel plating), smooth surface, improved torque performance |
9. | Water proof G | Avoid water into housing, seal between valve body and valve housing |
No | Name | Material | Advantages |
5. | Wall thickness | 2.0mm, PN20 | |
6. | Teflon washer | Import teflon |
1. Import teflon tube, numerical processing to perfectly match with ball surface 2. Minimal deformation, polish surface, wearable |
7 | 0-ring | EPDM |
1. Good elasticity, as buffer after Teflon washer to improve seal effect 2. Reasonable structure design, ensures perfect holding margin |