Green Building, Low Carbon Emission
| Place of Origin: | China |
|---|---|
| Brand Name: | Runpaq |
| Certification: | CE |
| Model Number: | S6000-DN15 |
| Minimum Order Quantity: | 50 pieces |
| Price: | USD25/piece (>1000pcs) / USD26.5 (50-1000 pcs) |
| Packaging Details: | box + maste carton + pallet |
| Delivery Time: | 15-21 days |
| Payment Terms: | L/C, T/T, D/A, D/P, Western Union |
| Supply Ability: | 200000 sets/month |
| Diameter: | DN15-20 (3 Way) , DN8-DN32 (2 Way) | Pressure: | PN16 / 1.6 Mpa / 232 Psi / 16 Bar |
|---|---|---|---|
| Max Current At Idle: | < 25 MA | Max Current At Full Load: | About 550 MA |
| Torque At 3.6V: | > 1.8NM | Open Close Time: | < 8 Seconds |
| Valve Body Material: | Brass, Stainless Steel SS304, 316 | Product Name: | Flow Control Ball Valve With Temperature Sensor |
| High Light: | two port motorised valve,DN15 heating ball valve,DN15 two port motorised valve |
||
heating ball valve, two port motorized valve for hot water flow control, HVAC
Product Description
The zone valves internally consists of a motor to move the ball valve to the open position, a spring to return it to the closed position, and a microswitch which is activated when the valve is fully open. In a heating system when heat is required, power is applied to the motor to open the valve by the thermostat detection.
Application
Advantages
| No | Name | Material | Advantage |
| 1. | O-ring |
Import fluoro rubber (green) |
Resistance to high temperature, oil, corrosion, chemicals, Work temp.: —30℃+280℃.Quadruple seals, minimize the risk of leakage. |
| 2. | Drainage | Drain just in case leakage happens | |
| 4 | 0-ring | EPDM (red) | Between nut and valve body, extra external leak proof, reduce the possibility of internal leak |
| 8. | Ball | Brass or SS304 | Finely polished, rack nickel plating (not barrel plating), smooth surface, improved torque performance |
| 9. | Water proof G | Avoid water into housing, seal between valve body and valve housing |
| No | Name | Material | Advantages |
| 5. | Wall thickness | 2.0mm, PN20 | |
| 6. | Teflon washer | Import teflon |
1. Import teflon tube, numerical processing to perfectly match with ball surface 2. Minimal deformation, polish surface, wearable |
| 7 | 0-ring | EPDM |
1. Good elasticity, as buffer after Teflon washer to improve seal effect 2. Reasonable structure design, ensures perfect holding margin |
